The soundbar that projects.
A 2.1 system with patented Psyx® spatial rendering: shape the height, width and center of the sound field from your couch. No mics, no room tuning, no sweet spot.
Psyx®, decades of spatial research, in your living room
Psyx Research has spent decades on spatial mapping and rendering of recorded sound. When you can hear every word of a movie on a noisy plane, that's Psyx extracting and re-placing the dialogue. When your car fills with music from door-mounted speakers, that's the Psyx image-map renderer virtualizing the sound's position. The same patented technology, used by leaders in automotive audio like Panasonic Automotive and Analog Devices, powers the NXBAR 2.1.
Height (−4 to +4)
Places you inside an immersive dome of sound, without ceiling speakers, room mics or calibration. Works on any stereo signal: TV, external input or Bluetooth.
Width (−4 to +5)
Widens the sound field until the room fills with spacious surround, from a single 900 mm bar under your TV.
Center / HearMore™ (−4 to +6)
Moves the dialogue channel forward or back. From +5, HearMore™ makes voices brighter and more present. Only the voices get louder, never the whole mix.
Four memories. Zero compromises.
Forget the "MUSIC / NEWS / SPORTS / MOVIES" buttons that never sound right. Dial in Height, Width, Center and Sub exactly how you like them for each kind of content, then press-and-hold A, B, C or D to store it. One touch recalls everything: input, volume and all audio parameters.
- 4 custom memories A / B / C / D, saved from the remote
- Wireless subwoofer, off to +4 pre-paired out of the box
- Auto-reconnect Bluetooth 5.3 with one-touch pairing from the remote
NXBAR 2.1 at a glance
| Model | NXT2.1 |
|---|---|
| Soundbar drivers | 4 × 2.25″ (L/R) |
| Subwoofer driver | 1 × 6.5″, wireless |
| Frequency response | 50 Hz to 20 kHz |
| Bluetooth | 5.3, auto-reconnect |
| Inputs | HDMI (TV ARC), Optical, AUX 3.5 mm, USB media playback |
| Soundbar dimensions | 900 × 105 × 65 mm (W×H×D) |
|---|---|
| Subwoofer dimensions | 186 × 260 × 296 mm (L×H×D) |
| Power | AC 100 to 240 V |
| Standby consumption | < 0.5 W (auto-standby after 24 h idle) |
| Operating temperature | 0 to 45 °C / 32 to 113 °F |
| Compliance | FCC Part 15 Class B · CE · RoHS |
NXBAR 2.1 vs ordinary soundbars
Draft comparison. Marketing copy pass pending.
NXBAR 2.1 $499 | Ordinary soundbar $300 to $900 | |
|---|---|---|
| Spatial projection | Height, Width and Center, adjustable from the remote | Fixed virtual surround preset |
| Dialogue technology | HearMore™, voice-only clarity up to +6 | "Dialogue mode" boosts the whole mix |
| Custom memories | 4 (A/B/C/D), input and all parameters | Factory presets only |
| Room tuning required | None. No mics, no calibration | Mic calibration or app setup |
| Built by | Console and record makers | Consumer electronics brand |
Plugged in and projecting in minutes
1 · Connect
One HDMI cable to your TV's ARC port (or optical, AUX, USB, Bluetooth). Set the TV output to PCM and you're done.
2 · Place the sub
The wireless subwoofer arrives pre-paired. Put it anywhere with a power outlet. No cables to the bar.
3 · Shape the sound
Grab the remote, push Height, Width and Center until the room sounds right, then save it to a memory.
Hear it before you buy it.
Our live demo uses real recordings of this exact soundbar.